Home › How to calculate the square footage of a house
How to Calculate the Square Footage of a House
On this page
Short answer: measure each finished room, convert the measurements to feet, multiply length × width, then add the rooms together. In the two-story example below, the first floor is 591 sq ft, the second floor is 574 sq ft, and the finished total is 1,165 sq ft. The garage and the unfinished basement are recorded separately, not folded into that total.
This is a room-by-room floor area you can measure yourself. It is a useful number for flooring, paint and planning. It is not automatically the square footage on a listing, appraisal or tax record. Those figures often follow their own rules (finished space only, how stairs are counted, whether measurements are taken inside or outside the walls). If you are comparing your total to someone else's number, ask how that number was measured.
For one rectangular room, use how to measure the square feet of a room. For an L-shape, bay or angled wall, use the irregular-room guide. Then add those results here.
How to measure a house, step by step
- Sketch the floor plan. A rough outline is enough: each room, hallway, closet, stair opening, garage and basement. Label two floors separately if you have them.
- Decide what you are trying to measure. For a finished-area figure, include rooms you live in year-round: living areas, kitchens, bedrooms, finished halls and finished closets. Treat a garage, open porch, unfinished attic or unfinished basement as a separate line, even if you measure them too.
- Measure each room at floor level, corner to corner, and write length and width in feet and inches. Measure hallways and closets the same way.
- Convert inches to feet (divide inches by 12) and multiply length × width. A room 15 ft 6 in by 12 ft 3 in is 15.5 × 12.25 = 189.88 sq ft.
- Add the rooms on each floor, then add the floors. Count stairs once (usually with one of the two floors) so they are not added twice.
- Record exclusions separately — garage, unfinished basement, open porches — so you can state a finished total and a "plus" total without mixing them.
The square footage calculator accepts feet and inches, so you can skip the conversion on each room and still add the results by hand (or in a notebook).
Worked example: a two-story house
All rooms below are rectangles, measured inside, at the floor. Numbers are an example house, not a claim about any real property.
First floor
| Space | Size | Square feet |
|---|---|---|
| Living room | 15 × 16 ft | 240 |
| Kitchen | 11 × 12 ft | 132 |
| Dining room | 10 × 12 ft | 120 |
| Half bath | 5 × 8 ft | 40 |
| Hall | 3.5 × 14 ft | 49 |
| Closet | 2 × 5 ft | 10 |
| First-floor total | 591 |
Second floor
| Space | Size | Square feet |
|---|---|---|
| Bedroom | 13 × 14 ft | 182 |
| Bedroom | 11 × 12 ft | 132 |
| Bedroom | 10 × 11 ft | 110 |
| Bath | 8 × 9 ft | 72 |
| Hall | 3 × 16 ft | 48 |
| Closets (2 × 6, 2 × 5 and 2 × 4 ft) | 12 + 10 + 8 | 30 |
| Second-floor total | 574 |
Finished total: 591 + 574 = 1,165 sq ft.
Recorded separately
| Space | Size | Square feet |
|---|---|---|
| Garage | 20 × 22 ft | 440 |
| Unfinished basement | 28 × 22 ft | 616 |
If you need a "total under roof" figure for your own planning, you can add those: 1,165 + 440 + 616 = 2,221 sq ft. Do not treat that as a finished living-area figure, and do not assume a listing uses it.
Feet-and-inches, checked two ways
One of the bedrooms might have been 15 ft 6 in by 12 ft 3 in instead of a whole-foot rectangle:
- 15 ft 6 in = 15.5 ft, 12 ft 3 in = 12.25 ft, 15.5 × 12.25 = 189.88 sq ft
- Or in inches: 186 in × 147 in = 27,342 sq in, ÷ 144 = 189.88 sq ft
Both paths match. If you had rounded each wall down to 15 × 12 = 180 sq ft, you would be 9.88 sq ft short on that room alone. On a whole house, those shortfalls add up when you order flooring.
What people often leave out — and what they sometimes add twice
Often left out of a finished total: garages, carports, open porches and decks, unfinished attics, unfinished basements, and mechanical rooms that are not finished living space. Measure them if you need the area for storage or a future finish, but keep them on a separate line.
Easy to double-count: the stair opening. If you add the full hallway on both floors, you may be counting the same stair area twice. Pick a rule and stick to it — for example, include the stairs with the first floor and subtract the opening from the second-floor hall, or the reverse.
Finished basements and attics: if the space is finished and heated like the rest of the house, many people include it in a finished total they use for remodeling. Listings and appraisals may still treat it differently. When in doubt, report it as its own line: "1,165 sq ft finished above grade, plus a finished basement of X sq ft."
This page does not apply any official measuring standard. If you need a figure for a listing, loan or tax record, use the method that the person or form in question requires, or hire someone who works to that method.
From house area to materials
- Flooring or carpet: use the finished rooms you are actually covering, then the flooring calculator or carpet installation cost calculator, and the flooring waste factor guide.
- Paint: you need wall area, not floor area. Use the paint calculator.
- A single room only: go back to how to measure a room.
FAQ
How do I calculate the square footage of a house?
Measure each finished room (and finished halls and closets), convert to feet, multiply length by width, and add them. Keep the garage and unfinished areas on separate lines.
Do I include the garage?
Usually not in a finished living-area total. Measure it, record it separately (20 × 22 ft = 440 sq ft in the example), and say so.
Do I include a basement?
Include it in a finished total only if it is finished living space, and even then, consider listing it separately. An unfinished basement (28 × 22 ft = 616 sq ft in the example) stays off the finished total.
How is this different from the square footage on a listing?
Listings, appraisals and tax records often use their own rules. Your room-by-room total is still useful for projects. To compare the two, ask how the published number was measured.
What if a room is not a rectangle?
Split it into rectangles, or use the irregular-room guide and add that result to the house total.
Cite this page: Pierre Mentor, “How to Calculate the Square Footage of a House,” CalcSqft.com, updated Nov 21, 2026, https://calcsqft.com/guides/how-to-calculate-square-footage-of-a-house/
