Home › Paint Calculator
Paint Calculator
On this page
Paint calculator
3 × 7 ft = 21
3 × 5 ft = 15
Sherwin-Williams’ published range is 350–400 sq ft per gallon
Use the coverage printed on your can. Textured, porous or patched walls and big color changes can take more paint or an extra coat.
Paint is sold by coverage, not by room size. A 12 × 14 ft room has 168 sq ft of floor but more than 400 sq ft of wall. The calculator turns your room dimensions into the area you'll actually paint, then into gallons.
The formula
- Wall area = 2 × (length + width) × wall height
- Subtract openings: each door or window is its width × height
- Total to paint = (wall area − openings) × number of coats
- Gallons = total to paint ÷ coverage per gallon
Add the ceiling separately if you're painting it. Its area is simply length × width.
How much does a gallon cover?
Sherwin-Williams' paint calculator FAQ gives these figures:
| Product | Coverage (Sherwin-Williams) |
|---|---|
| 1 gallon of paint | about 350–400 sq ft |
| 1 quart of paint | about 100 sq ft |
| 1 gallon of primer | about 200–300 sq ft |
Sherwin-Williams adds that "product requirements will vary according to factors such as application method and surface type or condition." Textured, porous or previously unpainted surfaces take more. The calculator starts at 350 sq ft per gallon, the low end of that range, so the estimate errs toward having enough. If your product's label or data sheet states a different coverage, enter that instead.
Worked example: 12 × 14 ft bedroom, 8 ft walls, two coats
- Wall area: 2 × (12 + 14) × 8 = 416 sq ft
- Openings: one door measured at 3 × 7 ft = 21 sq ft, and two windows at 3 × 5 ft = 30 sq ft, for 51 sq ft in total
- Paintable wall: 416 − 51 = 365 sq ft
- Two coats: 365 × 2 = 730 sq ft
- At 350 sq ft/gal: 730 ÷ 350 = 2.09 gallons. At 400 sq ft/gal: 1.83 gallons
Two gallons cover the job only if the paint gets close to the top of its range. Two gallons plus one quart (2.25 gallons) covers it even at 350 sq ft per gallon. If you'd rather not risk a second trip, buy that.
Wall area and paint for common room sizes
Walls only, 8 ft ceilings, two coats, before subtracting doors and windows. Geometry for the area, and Sherwin-Williams' 350–400 sq ft per gallon for the gallons:
| Room | Floor area | Wall area (8 ft walls) | Gallons for 2 coats at 350 sq ft/gal | at 400 sq ft/gal |
|---|---|---|---|---|
| 10 × 10 ft | 100 sq ft | 320 sq ft | 1.83 | 1.60 |
| 10 × 12 ft | 120 sq ft | 352 sq ft | 2.01 | 1.76 |
| 12 × 12 ft | 144 sq ft | 384 sq ft | 2.19 | 1.92 |
| 12 × 14 ft | 168 sq ft | 416 sq ft | 2.38 | 2.08 |
| 14 × 16 ft | 224 sq ft | 480 sq ft | 2.74 | 2.40 |
| 16 × 20 ft | 320 sq ft | 576 sq ft | 3.29 | 2.88 |
For 9 ft walls, multiply the wall area by 9 ÷ 8. For 10 ft walls, multiply by 10 ÷ 8 = 1.25.
Measuring tips
- Measure your actual doors and windows. Sizes vary, so use a tape measure rather than a rule of thumb. Small openings barely change the total, but a wide sliding door or a picture window does.
- Count coats realistically. A big color change or fresh drywall often needs primer first. Use the primer coverage figures above for that coat.
- Trim is separate. Baseboards, door casings and crown molding are usually painted in a different sheen, and their area is small. Most people buy a quart for trim rather than calculating it.
- Ceilings. A 12 × 14 ceiling is 168 sq ft per coat. Two coats is 336 sq ft, just under one gallon at 350 sq ft per gallon.
FAQ
How many square feet does a gallon of paint cover?
Sherwin-Williams says about 350–400 sq ft per gallon. Rough or porous surfaces take more paint.
How much paint do I need for a 12 × 12 room?
The walls are 384 sq ft with 8 ft ceilings. Two coats at 350 sq ft per gallon is about 2.2 gallons before subtracting doors and windows.
How many coats of paint do I need?
The calculator defaults to two, a common choice for even color. Use your own number. The product label or the store can advise for a specific color change.
How much does a quart cover?
About 100 sq ft, according to Sherwin-Williams. That's enough for an accent wall or a door.
Should I subtract windows and doors?
Yes, if you want a closer estimate. Measure each one and subtract its width × height. If you skip it, the estimate just comes out on the high side.
This site is owned and operated by calcsqft.com.
Sources (accessed November 10, 2026)
- Sherwin-Williams, "How to Use Paint Calculator | FAQs": https://www.sherwin-williams.com/en-us/color/color-tools/paint-calculator (350–400 sq ft per gallon, 100 sq ft per quart, 200–300 sq ft per gallon of primer, and the note that requirements vary by application method and surface). Sherwin-Williams is named only as the source of these figures. This site isn't affiliated with it.
- Wall and ceiling areas: geometry.
Cite this page: Pierre Mentor, “Paint Calculator,” CalcSqft.com, updated Nov 10, 2026, https://calcsqft.com/paint-calculator/
