Home › FAQ

Frequently Asked Questions

By · Updated Nov 10, 2026 · Editorial policy

On this page
  1. Measuring
  2. Units and conversions
  3. Flooring and tile
  4. Mulch, soil and concrete
  5. About the calculators

Short answers to the questions people ask most while measuring a room or yard and turning it into a shopping list. Each answer links to the calculator or guide that goes into more detail.

Measuring

How do I calculate square footage?

Multiply length by width, both in feet. A 15 × 11 ft room is 165 sq ft. For anything that isn't a rectangle, split it into rectangles, triangles and circles, find each area, and add them. The square footage calculator does the adding for you.

How do I measure an L-shaped room?

Split it into two rectangles and add them, then check your answer by drawing a box around the whole room and subtracting the empty corner. Both methods should match. There's a full worked example in the irregular room guide.

Should I measure in feet and inches or decimal feet?

Measure in whatever your tape shows, then convert inches to decimal feet by dividing by 12 before you multiply. 10 ft 9 in is 10.75 ft. Don't multiply feet-and-inches figures directly. "10.9 ft" is not the same as 10 ft 9 in.

Do closets count?

For flooring, yes, if the floor continues into them. For a rug, paint or furniture planning, usually not. Measure each closet as its own rectangle so you can include or leave it out.

How do I measure a room that isn't square?

Compare the two diagonals. If they differ by more than a few inches, measure all four walls and one diagonal, split the room into two triangles, and calculate each from its three sides. The irregular room guide shows the formula.

Is the square footage on a home listing the same as my floor area?

No. A listing's living area normally covers the whole home and is measured to the outside of exterior walls, and the rules vary by market. For buying materials, measure the actual floor you're covering.

Units and conversions

How many square feet are in a square yard?

Nine, because a yard is 3 ft and 3 × 3 = 9. Divide square feet by 9 to get square yards, the unit most carpet is priced in. 180 sq ft is 20 sq yd.

How do I convert square meters to square feet?

Multiply by 10.764. 20 m² is about 215.3 sq ft. To go the other way, divide square feet by 10.764.

How many square feet are in an acre?

43,560. A quarter acre is 10,890 sq ft. The square feet to acres converter handles lot dimensions and hectares too.

What's the difference between square feet and cubic feet?

Square feet measure a flat area. Cubic feet measure volume, which is area × depth. Mulch, soil and concrete are sold by volume, so you multiply your area by the depth in feet (inches ÷ 12). 100 sq ft at 3 inches deep is 100 × 0.25 = 25 cu ft.

Flooring and tile

How much extra flooring should I buy?

About 10% for a typical room, 5–10% for a large plain rectangle, 15% for diagonal layouts and 15–20% or more for herringbone. Follow the manufacturer's figure if it gives one. The flooring waste guide explains why.

How many boxes of flooring do I need?

Multiply the area by 1 plus your waste percentage, divide by the square feet per carton (printed on the box), and round up. 180 sq ft at 10% is 198 sq ft. With 20 sq ft cartons that's 9.9, so 10 cartons. The flooring calculator does this for several rooms at once.

How many tiles do I need?

Find the area of one tile in square feet (width × length in inches ÷ 144), add waste to the floor area, and divide. A 120 sq ft floor in 12 × 24 in tiles (2 sq ft each) at 10% waste needs 66 tiles.

Is it cheaper to buy flooring for all rooms at once?

Often, yes. Offcuts from one room can finish another, so a combined order can need fewer cartons than separate orders, and it keeps everything in one production lot. Rooms of 130 and 95 sq ft at 10% need 14 cartons of 20 sq ft if calculated separately, but 13 together.

What does flooring installation cost?

It depends heavily on the material and local labor. The installation cost calculator shows published national ranges per square foot and lets you enter your own quote.

Mulch, soil and concrete

How much mulch do I need?

Area in square feet × depth in inches ÷ 324 gives cubic yards. A 12 × 10 ft bed at 3 inches needs 120 × 3 ÷ 324 = 1.11 cubic yards. See the mulch calculator.

How deep should mulch be?

University of Florida IFAS Extension recommends 2–3 inches around established plants, about 1 inch around seedlings and small vegetables, and no more than 3 inches. The mulch depth guide covers topping up and tree rings.

How many bags of mulch are in a cubic yard?

27 cubic feet: 13.5 bags of 2 cu ft or 9 bags of 3 cu ft.

How many bags of concrete do I need?

Find the volume in cubic feet (length × width × thickness in inches ÷ 12) and divide by the bag's yield. Per QUIKRETE's data sheet, an 80 lb bag of its Concrete Mix makes about 0.60 cu ft. The concrete slab guide has worked examples and a margin for uneven ground.

About the calculators

Why do the calculators round up?

You can't buy part of a box or bag, so material counts are rounded up to whole units. The waste allowance is added before rounding.

Are the results exact?

The geometry and unit conversions are exact. Material quantities are estimates, because real rooms, cuts and ground conditions vary. Treat the result as a planning number and confirm it with your retailer or installer before a large order.

Do you store the numbers I enter?

No. The calculators run in your browser, and what you type isn't sent to us. The privacy policy explains the analytics and advertising cookies the site uses.

I think a result is wrong. What should I do?

Send corrections to the contact address on our Contact page. Include the numbers you entered and what you expected, plus a link if a published rate or source has changed.

Cite this page: Pierre Mentor, “Frequently Asked Questions,” CalcSqft.com, updated Nov 10, 2026, https://calcsqft.com/faq/