Home › Guides › How Much Concrete Do You Need for a Slab?

How Much Concrete Do You Need for a Slab?

By · Updated Nov 10, 2026 · Editorial policy

On this page
  1. Step 1: Volume in cubic feet
  2. Step 2: Cubic yards (for ready-mix)
  3. Step 3: Bags (for bagged mix)
  4. Step 4: Add a margin for real-world ground
  5. Worked examples
  6. Weight and logistics
  7. Before you pour
  8. FAQ
  9. Related

Concrete is the one home project material where running short really hurts. A slab poured in two batches hours apart can show a cold joint, and a half-mixed bag can't wait while someone drives back to the store. Working out the volume properly, then adding a sensible margin, is the cheapest insurance you can buy. This guide walks through the math the concrete tool on the home page uses, then adds the parts it leaves to you: bag sizes, extra for uneven ground, round slabs and post holes.

Step 1: Volume in cubic feet

A slab is a box, so its volume is length × width × thickness, all in feet. Thickness is usually given in inches, so divide by 12:

Cubic feet = length (ft) × width (ft) × thickness (in) ÷ 12

Example: a 10 × 12 ft patio, 4 inches thick: 10 × 12 × 4 ÷ 12 = 40 cu ft.

If the area is irregular, find its square footage first (the irregular area guide shows how), then multiply by thickness ÷ 12.

Step 2: Cubic yards (for ready-mix)

Ready-mix concrete is ordered by the cubic yard, and 1 cubic yard = 27 cu ft:

40 cu ft ÷ 27 = 1.48 cubic yards

Ask your supplier how they round orders and whether they have a minimum load size, since both vary by company.

Step 3: Bags (for bagged mix)

Bagged concrete is sold by weight, but what matters is how much volume each bag makes once mixed. QUIKRETE's data sheet for its standard Concrete Mix lists these approximate yields:

Bag sizeApproximate yieldBags per cubic yard
40 lb0.30 cu ft90
60 lb0.45 cu ft60
80 lb0.60 cu ft45

Other brands and specialty mixes yield different amounts, so check the bag. For the 40 cu ft patio:

Step 4: Add a margin for real-world ground

The calculation assumes a perfectly flat base and forms that are exactly the planned depth. Real subgrades have dips, forms bow slightly, and some concrete is always left in the mixer or wheelbarrow. A margin of 5–10% is common practice for small DIY pours. It isn't a code requirement, just a buffer, and you should use more if the ground is rough.

With 10% extra, the patio becomes 40 × 1.10 = 44 cu ft:

The thickness matters more than most people expect. If the forms for that patio are actually 4 inches deep but you calculated for 3.5 inches, you would have ordered 35 cu ft instead of 40, which is 12.5% short. Measure form depth in several places before you buy.

Worked examples

Shed pad: 8 × 10 ft, 4 inches

Round slab: 10 ft across, 4 inches

Fence post holes: 10 in diameter, 36 in deep, 4×4 posts

Post holes are cylinders, and the post takes up part of the space.

The last line is a useful habit for any multi-part pour: add up the volume first, then round once.

Weight and logistics

Bags are heavy, and the total weight is easy to underestimate. The patio's 74 bags of 80 lb weigh 5,920 lb, almost three tons. Before you pick up the bags yourself, check your vehicle's payload rating. For a pour that size, compare the bag price with a ready-mix or short-load delivery, and plan how many people you'll need to mix and place it before it starts to set.

Before you pour

The following points are from QUIKRETE's own instructions for its Concrete Mix. Follow the instructions on whatever product you use.

Bag yields and pouring guidance from QUIKRETE Concrete Mix (No. 1101) product data sheet, https://www.quikrete.com/pdfs/data_sheet-concrete%20mix%201101.pdf, checked November 9, 2026. QUIKRETE is named only as the source of the yields; this site is not affiliated with it.

FAQ

How many 80 lb bags of concrete make a cubic yard?

About 45, based on QUIKRETE's stated yield of roughly 0.60 cu ft per 80 lb bag (27 ÷ 0.60 = 45).

How much concrete do I need for a 10 × 10 slab, 4 inches thick?

10 × 10 × 4 ÷ 12 = 33.33 cu ft, or 1.23 cubic yards. That's 56 bags of 80 lb before any margin, or 62 bags with 10% extra.

Should I order extra concrete?

A 5–10% margin is common for small pours, to cover uneven ground and waste. Running short mid-pour is far more costly than a few leftover bags.

How do I calculate concrete for a round slab?

Find the area with π × radius², multiply by thickness in inches ÷ 12 for cubic feet, and divide by 27 for cubic yards.

How many bags do I need for a fence post?

For a 10 in × 36 in hole around a 4×4 post, about 1.38 cu ft, or 3 bags of 80 lb if you mix each hole separately. Add up all the holes and round once to buy fewer bags.

Cite this page: Pierre Mentor, “How Much Concrete Do You Need for a Slab?,” CalcSqft.com, updated Nov 10, 2026, https://calcsqft.com/guides/concrete-slab-volume/