Home › How to calculate cubic yards

How to Calculate Cubic Yards of Gravel, Topsoil, Mulch, or Concrete

By · Updated Nov 21, 2026 · Editorial policy

On this page
  1. How to do it, step by step
  2. How much area one cubic yard covers
  3. Bags per cubic yard
  4. Worked examples
  5. Cubic yards or tons?
  6. Common mistakes
  7. Related calculators and guides
  8. FAQ

Short answer: measure length and width in feet, measure depth in inches, then use cubic yards = length × width × depth ÷ 12 ÷ 27. A 10 × 16 ft patio, 3 inches deep, is 10 × 16 × 3 ÷ 12 = 40 cubic feet, and 40 ÷ 27 = 1.48 cubic yards.

Landscape yards sell gravel, topsoil and mulch by the cubic yard. Concrete is ordered the same way when you buy ready-mix. The formula does not change with the material. What changes is the depth you choose and whether you buy in bulk or in bags.

Use this page to do the conversion by hand, then check it in the matching calculator: gravel, topsoil, mulch, or concrete.

How to do it, step by step

  1. Measure the length and width in feet. For a path, driveway or bed, measure at the surface you'll cover. If the shape isn't a rectangle, split it into rectangles (or a circle or triangle) and add the pieces.
  2. Measure the depth in inches. Depth is the thickness of the material, not the length of the area.
  3. Convert depth to feet by dividing inches by 12. Three inches is 0.25 ft; four inches is 0.333... ft; six inches is 0.5 ft.
  4. Multiply length × width × depth in feet. That is the volume in cubic feet.
  5. Divide cubic feet by 27. There are 27 cubic feet in a cubic yard (3 × 3 × 3).
  6. Decide how you'll buy it. Bulk is quoted in cubic yards (or tons — see below). Bags are quoted in cubic feet printed on the bag; divide your cubic feet by the bag size and round up.

A compact form of steps 3–5 is:

Cubic feet = area (sq ft) × depth (in) ÷ 12
Cubic yards = cubic feet ÷ 27

The square footage calculator can give you the area if you have an odd-shaped space. Then come back to this formula for the depth.

How much area one cubic yard covers

One cubic yard is 27 cubic feet. Spread evenly, it covers 27 × 12 ÷ depth square feet:

DepthSq ft covered by 1 cubic yardCubic yards per 100 sq ft
1 in3240.31
2 in1620.62
3 in1080.93
4 in811.23
6 in541.85
8 in40.52.47
12 in273.70

The table is pure geometry. It assumes the material is spread to exactly that depth. Gravel works into soft soil and compacts; mulch settles. If you want a margin, add it yourself — the formula does not add any.

Bags per cubic yard

Bagged gravel, mulch and soil are sold by the volume printed on the bag. Divide 27 by that volume:

Bag size (as printed)Bags in one cubic yard
0.5 cu ft54
0.75 cu ft36
1 cu ft27

Check the bag. Some decorative stone is labelled by weight only. In that case, ask the store for the volume, or buy one bag and see how far it spreads.

Worked examples

Gravel patio: 10 × 16 ft, 3 in deep

Run the same numbers in the gravel calculator if you want tons as well. Tons depend on the stone and how wet it is, so enter the tons-per-yard figure your supplier gives you. This page does not invent one.

Topsoil for a bed: 8 × 24 ft, 6 in deep

Six inches is a typical depth when you are building a new bed, not topping up. If you are only adding an inch or two over existing soil, use that shallower depth instead. The topsoil calculator accepts either.

Mulch bed: 4 × 40 ft, 3 in deep

Three inches is a common finished depth for beds; how deep you go is your choice. For depth on existing beds and tree rings, see the mulch depth and coverage guide and the mulch calculator.

Concrete slab: 10 × 10 ft, 4 in thick

Ready-mix is ordered in cubic yards. Bagged mix is a different path (60 lb and 80 lb bags). The concrete calculator and the slab volume guide walk through both, including a margin for uneven ground.

Cubic yards or tons?

Some yards sell by the cubic yard and some by the ton. The conversion depends on the material, its size and how wet it is, so there is no single correct figure. Ask the supplier: "How many tons is a cubic yard of this product?" Then multiply. If they sell by the yard, you do not need it.

Common mistakes

  1. Forgetting to convert inches. Multiplying 10 × 16 × 3 and dividing by 27 treats the depth as 3 feet, not 3 inches, and overstates the volume by a factor of 12.
  2. Dividing by 27 before converting depth. Convert inches to feet (or use × depth ÷ 12) first, then divide by 27.
  3. Mixing units. Don't multiply a length in feet by a width in inches. Convert both to feet.
  4. Skipping an irregular area. Measure each rectangle, circle or triangle, then add. The irregular-room guide is written for floors, but the same split-and-add idea works for a bed or driveway.

FAQ

How do I calculate cubic yards from square feet?

Multiply the area in square feet by the depth in inches, divide by 12 to get cubic feet, then divide by 27. A 160 sq ft patio, 3 inches deep, is 40 cubic feet, or 1.48 cubic yards.

How many cubic feet are in a cubic yard?

27. A cube 3 feet on a side is 3 × 3 × 3 = 27 cubic feet.

How many bags of mulch or gravel equal a cubic yard?

It depends on the bag. A 0.5 cu ft bag takes 54 bags to make a yard; a 0.75 cu ft bag takes 36; a 1 cu ft bag takes 27.

How many cubic yards do I need for 100 square feet?

At 2 inches, 0.62 cubic yards; at 3 inches, 0.93; at 4 inches, 1.23; at 6 inches, 1.85. See the table above.

Does this formula work for concrete?

Yes, the volume math is the same. For a slab, also read the concrete slab volume guide, which covers ready-mix versus bags and a margin for the ground.

Cite this page: Pierre Mentor, “How to Calculate Cubic Yards of Gravel, Topsoil, Mulch, or Concrete,” CalcSqft.com, updated Nov 21, 2026, https://calcsqft.com/guides/how-to-calculate-cubic-yards/