Home › Gravel Calculator
Gravel Calculator
On this page
Gravel calculator
Optional. It varies by stone, size and moisture, so this field has no default: ask your supplier.
Volume is geometry: area × depth ÷ 12 = cu ft, ÷ 27 = cubic yards. Bags are rounded up. Tons appear only when you enter your supplier’s figure.
Gravel, pea gravel, crushed stone and river rock are all ordered the same way: by volume (cubic yards) from a landscape yard, or by the bag from a store. Bulk suppliers sometimes quote by the ton instead. This page gets you to a volume first, because that's pure measurement, and then converts it to whichever unit your supplier uses.
The formula
Cubic feet = area (sq ft) × depth (in) ÷ 12
Cubic yards = cubic feet ÷ 27
Bags = cubic feet ÷ bag size (cu ft), rounded up
Tons = cubic yards × your supplier's tons per cubic yard
For area: a rectangle is length × width, a circle is π × radius², and a triangle is base × height ÷ 2. Split an odd-shaped bed into these pieces and add them up.
How to calculate cubic yards: a step-by-step guide with a coverage table, bag counts and worked examples for gravel, topsoil, mulch and concrete.
Coverage by depth (one cubic yard)
Pure geometry: one cubic yard (27 cu ft) spread at each depth covers 27 × 12 ÷ depth square feet.
| Depth | Sq ft covered by 1 cubic yard | Cubic yards per 100 sq ft |
|---|---|---|
| 1 in | 324 | 0.31 |
| 2 in | 162 | 0.62 |
| 3 in | 108 | 0.93 |
| 4 in | 81 | 1.23 |
| 6 in | 54 | 1.85 |
| 8 in | 40.5 | 2.47 |
| 12 in | 27 | 3.70 |
The table assumes the gravel is spread to exactly that depth. Gravel compacts and works into soft soil, so many people round up. How much is up to you, and the calculator doesn't add anything unless you tell it to.
Bags per cubic yard
Bagged gravel and decorative stone are sold by volume printed on the bag. Divide 27 by the bag size:
| Bag size (as printed) | Bags per cubic yard |
|---|---|
| 0.5 cu ft | 54 |
| 0.75 cu ft | 36 |
| 1 cu ft | 27 |
| 1.5 cu ft | 18 |
| 2 cu ft | 13.5 |
Check the bag itself. Some decorative stone is labelled by weight only. In that case, ask the store for the volume, or buy one bag and measure how far it spreads.
Worked examples
Gravel driveway: 12 × 50 ft, 4 in deep
- 12 × 50 × 4 ÷ 12 = 200 cu ft
- 200 ÷ 27 = 7.41 cubic yards
- If your supplier sells by the ton, multiply 7.41 by the tons-per-yard figure they give you for that material.
Pea gravel path: 3 × 30 ft, 2 in deep
- 3 × 30 × 2 ÷ 12 = 15 cu ft = 0.56 cubic yards
- In 0.5 cu ft bags: 15 ÷ 0.5 = 30 bags
River rock bed: 6 × 20 ft, 3 in deep
- 6 × 20 × 3 ÷ 12 = 30 cu ft = 1.11 cubic yards
- In 0.5 cu ft bags: 60 bags. That's about the point where bulk delivery is worth pricing.
Cubic yards or tons?
Some yards sell by the cubic yard and some by the ton. The conversion depends on the stone, its size and how wet it is, so there's no single correct figure. This page deliberately doesn't give one. Ask the supplier: "How many tons is a cubic yard of this product?" Then enter that number. If they sell by the yard, you don't need it.
The weight still matters even when you buy by the yard. Gravel is heavy, so check your vehicle's payload rating before hauling it yourself. A delivery truck also needs a firm spot to tip the load, and your driveway may not be the best place.
Depth
The right depth depends on the job: a decorative layer, a walking path, a base under pavers or a slab, or a driveway carrying vehicles. It also depends on your soil and on the instructions from whoever designed the base. Base courses under pavers or concrete are usually set by the product's installation guide or by local rules. This page doesn't recommend depths. Use the table to see what any depth you choose will cost in material.
FAQ
How many square feet does a yard of gravel cover?
At 2 inches deep, 162 sq ft. At 3 inches, 108 sq ft. At 4 inches, 81 sq ft. That's geometry, before compaction.
How many bags of gravel make a yard?
54 bags of 0.5 cu ft, 27 bags of 1 cu ft. Divide 27 by the cubic feet on your bag.
How do I calculate gravel for a circle?
Area = π × radius². A circle 10 ft across has a radius of 5 ft, so 78.5 sq ft. At 3 inches deep: 78.5 × 3 ÷ 12 = 19.6 cu ft, or 0.73 cubic yards.
How many tons of gravel do I need?
First find cubic yards with the calculator, then multiply by your supplier's tons-per-cubic-yard figure for that material. It varies by stone type and size.
Is pea gravel calculated differently from crushed stone?
The volume math is the same. Only the conversion to tons differs, and only if you buy by weight.
This site is owned and operated by calcsqft.com.
Sources
- All figures on this page are geometry (1 cu yd = 27 cu ft; volume = area × depth).
- No tons-per-cubic-yard figure is given here. Enter your supplier's tons-per-yard figure for the material you're buying.
Cite this page: Pierre Mentor, “Gravel Calculator,” CalcSqft.com, updated Nov 10, 2026, https://calcsqft.com/gravel-calculator/
